TURBO BLOWER ( OEM SPEC NUMBER- A04B-0800-C0XX)
Your resonator TURBO BLOWER needs a reconditioning once in every 1200 or 24000 hours. Our facility provides the best rebuild and cost effective TURBO BOWLER we also provide OEM standard consumable spares for the same LIE has installed 30 and more TURBO BOWLER on warranty basis which is an added benefit to the customer .TURBO BOWLER is the precise machine, featuring super high-speed rotation of 60,000 rpm. During laser oscillation, the laser gas pressure is 100 to 110 Torr (1330 to 15000 Pa). The turbo blower circulates this rough–vacuum gas at high speed (up to 200m/s within the discharge tubes) without contaminating the gas. Turbo blower needs a reconditioning or replacement once in a every 12000 or 24000 hours based on the model of OSCILLATOR or RESONATOR.
SPEC. NO. OF TURBO BLOWER:
C2000E, C2000iB, C2000i-C
If the oscillator is not stopped with the correct procedure, the pressure in the vacuum chamber in the oscillator becomes lower than atmosphere. Opening the oil inlet under such a condition lets air enter the turbo blower. This flow of gas causes oil mist to enter the vacuum chamber of the oscillator, resulting in contamination of internal mirrors. If you do not conduct “Support function for start-up after turbo oil exchange “after replacing the turbo blower oil, abnormal discharge may occur, which can become a cause of the trouble. To avoid such kind of troubles always contact LASER EXPERTS INDIA professionals to assist you to carry out your Laser cutting machine maintenance